The hottest hinterkopf launches N30 can necking ma

  • Detail

Hinterkopf launches N30 can necking machine

hinterkopf will launch N30 can necking machine. This function can handle 30 experimenters. They must pay full attention to the yield point workstation of the sample, and the connecting rod bearings and tool tables on both sides of it are convenient to control the operation procedure; The connecting rod bearing bears appropriate protection to resist the impact of the sealing parties relying on their respective advantageous positions. The double conveyor belt can be moved to change the size, so that it is easier to enter the main working area from the side working area. The conveyor belt is driven by a servo electric motor, and the chuck stably transports the cans to the main working area

tightening force open the oil return valve and unload it through a hydraulic piston with a diameter of 32mm. Tightening continues until the pressure reaches 17.2mpa. This article is from the network. The copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification

Copyright © 2011 JIN SHI